The FV-200EV Emergency Message Panel is the emergency broadcast operating section of the FV-200 Series Emergency Public Address System. It need not be installed when the system is used solely for general broadcasting purpose. It has facilities to manually start and reset emergency broadcasts. Emergency announcements are recorded in English (default settings), which can be changed by USB data transfer operations from rear panel.
The FV-200PP Pre-Amplifier Mixer Panel is the basic operation section of the FV-200 Series Emergency Public Address System
The FV-224PA features 240W rated output with high capacity for audio requirement
MP-300 is an optional input module for FV-2148W Wall-Mount Voice Evacuation system that is installed on the Door Panel. This module features USB port, SD/MMC Card, Bluetooth, and FM Radio as Audio Input on the system. The connection of this module is interconnected by a cable that is provided on this module.
The FV-208EV Emergency Message Panel is the emergency broadcast operating section of the FV-200 Series Emergency Public Address System. It need not be installed when the system is used solely for general broadcasting purpose. It has facilities to manually start and reset emergency broadcasts. A total of 8 Emergency messages are recorded in English (default settings), which can be changed by USB data transfer operations from rear panel.
The FV-248PA features 480W rated output with high capacity for audio requirements.
The FV-200RF Microphone Receiver Panel is used to connect the RM-200M Remote Microphone to the FV-200 Series Emergency Public Address System. Up to 4 RM-200M can be connected.
The FV-200CA Amplifier Changeover Panel is used to automatically changeover FV-200 Series fault duty amplifier to working standby amplifier. 1 unit of FV-200CA can handle up to 6 nos. of FV-200 Series amplifiers.
The FV-200PS Switching DC Power Supply Panel supplies 24V DC power to each component of FV-200 Series Voice Evacuation System. In additional, the DC power supply shall connect to an emergency power supply for uninterrupted DC power during AC power failure.
The RM-200M Remote Microphone connects to the VM-3240VA, VM-3360VA, VM-2120 and VM-2240 for the purpose of making emergency(*3)/general broadcast announcements.
The RM-210 is an extension unit for increasing the number of function keys of TOA's Remote Microphones.
The WB-RM200 is to mount RM-200M, RM-200SA and RM-210 on the wall.
-thumbnail.jpg)
The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the SX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.
The VX-2000DS Emergency Power Supply Unit supplies the DC power to each equipment in the SX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery.
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.
The YA-1000A is installed in a power amplifier to detect the power amplifier's failure. Avoid using the YA-1000A during the power amplifier's parallel operation because it cannot detect a failure correctly.
