VX-3308WM
The VX-3308WM is a combined PA and VA system based on the VX-3000 system and is certified according to the European Standard EN54-16. It is designed to be wall-mounted requiring little space and can be operated as a stand-alone unit as well as being combined with all VX-3000 units. Due to the scalable and integrated architecture of the VX-3000 system, the VX-3308WM is an ideal solution for distributed locations, for example, to cover the many floors of a high-rise building.
(*2) 0 dB = 1 V
| Power Source | 220 - 230 V AC, 50 Hz |
|---|---|
| Power Consumption | 1100 W max in total (at rated output with charging) 460 W max in total (EN60065) |
| Current Specification | Maximum output current from the battery: 25 A Rated maximum continous output current, I max. a: 25 A Rated maximum short duration output current, I max. b: 25 A Rated minimum output current, I min: 0 A Ripple Voltage at I mac. b: 4 V max |
| DC Power Output | 1 x 31 V (19-33 V) 30 A max, M4 screw terminal, distance between barriers: 11 mm 1 x 24 V (16-25 V) 0.3 A max, removable terminal block (4 pins) |
| Charging Method | Temperature compensated trickle charging |
| Charging Output Voltage | 27.3 V ±0.3 V (at 25℃) Temperature correction coefficient: -40mV/℃ |
| Applicable Battery | Panasonic: LC-X1265PG/APG (65 Ah) |
| LAN A, B | Number of Connectors: 2 (LAN A, LAN B) Network I/F: 100BASE-TX Network Protocol: TCP, UDP, ARP, ICMP, RTP, IGMP, FTP, HTTP Spanning tree Protocol: RSTP Audio Transmission System: TOA Packet Audio (*1) Audio Encoding Method: PCM Audio Sampling Frequency: 48 kHz Audio Quantifying Bit Number: 16 bits Connection Device: VX-3004F, VX-3008F, VX-3308WM, VX-3016F, NX-300, Switching HUB Connector: Removable terminal block (9 pins) x 2 Connection Cable: Category 5 twisted pair cable (CAT5) or greater Number of Stages of Cascade connection: UP to 7 Maximum Cable Distance: 100 m |
| RS Link A, B | Number of Connectors: 2 (RS LINK A, RS LINK B) Audio input level: 0 dB (*2) Power feed: Max. 1 A per connector Connector: Removable terminal block (9 pins) x 2 Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater Maximum Cable Distance: 1200 m |
| Control Input 1, 2 | 16 inputs, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 2 mA Fault Detection System: Short circuit, Open circuit, Method: Voltage detect Connector: Removable terminal block (9 pins) x 3 Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater |
| Emergency Control IN | Input 2: Isolated voltage input, -24 to +24 V Connector: Removable terminal block (5 pins) Connection Cable: Category 5 twisted pair cable (CAT5) or greater |
| VOX Function | Threshold: -60 to 0 dB (1 dB steps) Hysteresis: 0 to +10 dB, Hold time: 10 ms - 10 s Settable for each audio input |
| Control Output 1, 2 | General outputs : 8 No-voltage make contact, electrical contact output Control current: 10 mA, withstand voltage: 28 V DC Connector: Removable terminal block (9 pins) Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater |
| ATT/Control Output | 4 outputs, no-voltage make contact, relay contact (NC, NO, C) Control current: 2 mA to 5 A, withstand voltage: 125 V AC, 40 V DC Connector: Removable terminal block (12 pins) Connection Cable: Shielded Category 5 twisted pair cable (CAT5-STP) or greater |
| Audio Input 1, 2, 3, 4 | 4 inputs Sensitivity: LINE: -20 dB (*2), MIC: -60 dB (*2) LINE/MIC/ANC Sensor (changeable with setting software) Gain Control: volume adjustable with volume control (internal front panel) - ∞ to 0 dB Input Impedance: 47 kΩ, electronically-balanced Frequency Response: 40 Hz - 20 kHz ±1 dB (at DA CONTROL LINK, 0 dB output) Distortion: 1% or less (at DA CONTROL LINK, 0 dB output, 1 kHz) Signal to Noise Ratio: 60 dB or more (at DA CONTROL LINK, A-weighted) Phantom Power Supply: 24 V DC, can be set with setting software Connector: Removable terminal block (6 pins) …2 |
Digital Signal Processing
| Feedback Suppression Function | 7 filters (auto) Settable for each audio input and RS LINK (A/B) |
|---|---|
| Equalizer/Filter | 3 bands for each audio input and RS LINK (A/B), 6 bands for each amplifier output Parametric equalizer: 20 Hz - 20 kHz, ±15 dB, Q: 0.267 - 69.249 Filtering: High-pass filter 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct Low-pass filter 20 Hz - 20 kHz, 6 dB/oct, 12 dB/oct High shelving filter 6 - 20 kHz, ±15 dB Low shelving filter 20 - 500 Hz, ±15 dB Notch filter (amplifier output only) 20 Hz - 20 kHz, Q: 8.651 - 69.249 All-pass filter (amplifier output only) 20 Hz - 20 kHz, Q: 0.267 - 69.249 Horn equalizer (amplifier output only) 20 kHz, 0 to +18 dB (0.5 dB steps) |
| Compressor | Threshold: -20 to 0 dB (1 dB steps) Ratio: 1:1, 1.1:1, 1.2:1, 1.3:1, 1.5:1, 1.7:1, 2:1, 2.3:1, 2.6:1, 3:1, 4:1, 5:1, 7:1, 8:1, 10:1, 12:1, 20:1, ∞:1 Attack time: 0.2 ms - 5 s, Release time: 10 ms - 5 s Gain: - ∞ to +10 dB, Knee type: hard knee, middle knee, soft knee |
| Delay | For each amplifier output, 0 - 2730 ms (0.021 ms steps) |
| ANC(Ambient Noise Control) | Amplifier output level control, Automatic sensor input reference level measuring, Sensor input reference level fine adjustment Maximum output signal level control: -15 to 0 dB Minimum output signal level control: -18 to -3 dB Sample time setting: 10 s, 20 s, 30 s, 1 min, 5 min Gain ratio setting: (Ambient noise: Output signal level) 6:3, 5:3, 4:3, 3:3, 3:4, 3:5, 3:6 Ambient noise Measuring frequency setting: 20 Hz - 20 kHz, 3 points |
| Speaker Line | 8 channels, 8 Earth terminal Maximum Voltage/Current: 100 Vrms, 5 Arms Connector: Removable terminal block (6 pins) x 4 Fault Detection System: Short circuit, Open circuit, Ground fault Method: Impedance or End of line |
| Power Amplifier | Number of Amplifiers: Max: VX-030DA x 3 (2 for zone and 1 for standby) Factory preset: VX-030DA x 2 (1 for zone and 1 for standby) Connector: DA CONTROL LINK x 3, DA OUTPUT LINK x 3 |
| Indicators | AC POWER IN (green) …1, RUN (green) …1, EMERGENCY (red) …1, CPU OFF (red) …1, LAN A (green) …1, LAN B (green) …1, RS LINK A (green) …1, RS LINK B (green) …1 FAULT STATUS (yellow) GENERAL …1, UNIT …1, NETWORK …1, EMG MIC …1, FUSE …1, POWER …1, CPU …1, ZONE …8 AMPLIFIER PEAK (red) …3, SIGNAL (green) …3, OPERATE (green) …3, POWER (green) …3 BATTERY CHARGING (green) ...1, POWER (green) ...1, CONNECT (green) ...1, CONDITION (green) ...1 |
| Operation | Fault Control Switch x 2 (ACK/RESET), Battery Test x 1, Power Supply Reset x 1, Test Switch x 1 (LAMP TEST) Setting Switch: ID Number x 1, Reset x 1, Impedance x 1 Settling (internal front panel): DS Link Terminate x 1 Battery Internal Resistance x 1, Charge Current x 1, AC Power Loss x 1 |
| Operating Temperature | -5 ℃ to +45 ℃ |
| Operating Humidity | 90 %RH or less (no condensation) |
| Finish | Panel: Surface-treated steel plate, black, 30 % gloss, paint |
| Dimensions | 550 (W) × 700 (H) × 202.3 (D) mm |
| Weight | 33.1 kg (Including VX-030DA x 2) |
| Accessory | Removable terminal plug (4 pins) …1, Removable terminal plug (5 pins) …1, Removable terminal plug (6 pins) …6, Removable terminal plug (9 pins) …8, Removable terminal plug (12 pins) …1, Battery cable (490mm) ...1, DA control link cable ...1, DA output link cable ...1, DC fuse (30A) ...1, DC fuse (7.5A) ...1, Key ...2, Wall Mounting pattern paper ...1 |
